SYE for a 241, preferably a super short
Hydraulic SM465 bellhousing, or complete hydro clutch setup, my bellhousing is cracked
Married Ford 205
Detroit and/or ARB for a 35 spline D60/4.56 up carrier
1410 U-bolt yoke for a D60

10,000lb or heavier hydraulic winch... needs to be power in/out

16.5x10 or wider 8 lug steel wheels... or beadlocks with ~4" of backspacing
15x8 4" BS chevy 6 on 5.5" aluminum wheels
16x8 ~5" BS Chevy 6 on 5.5" aluminum wheels
GM 3/4 ton or 1 ton 56" rear springs in really good shape or 4" lift ones

31x10.50r15 all terrains
33x12.50r15 all terrains
44s... TSLs, Boggers, or IROKs... or bigger... for 16.5" or 17" wheels

Full manual doors for a 80-91 chevy fullsize... prefer the 79up half panels... prefer dark blue panels.

4.3L V6 roller motor, complete. I don't want a balance shaft TBI/CPI motor. If 96up it needs to have the computer/harness.
5.3L/6.0L motor, needs to be complete and running with computer/harness.